Inerting System - BA86.10-P-1000-03E
WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205, 206, 213, 238, 253, 257, 290
INERTING
| Number | Designation | Model 205 | Model 206 | ||||
|---|---|---|---|---|---|---|---|
| BA86.10-P-1001-03E | Nut, holder for pressure medium reservoir to body | M6 | Nm | 8 | 4 | ||
| BA86.10-P-1002-03E | Pipe for inerting to engine | M6 | Screw | Nm | 8 | 8 | |
| Nut | Stage 1 | Nm | 8 | - | |||
| Stage 2 | ∠° | 30 | - | ||||
INERTING
| Number | Designation M6 |
Model 213 | Model 238 | ||||
|---|---|---|---|---|---|---|---|
| BA86.10-P-1001-03E | Nut, holder for pressure medium reservoir to body | M6 | Nm | 8 | 8 | ||
| BA86.10-P-1002-03E | Pipe for inerting to engine | M6 | Screw | Nm | 8 | 8 | |
| Nut | Stage 1 | Nm | 8 | 8 | |||
| Stage 2 | ∠° | 30 | 30 | ||||
INERTING
| Number | Designation | Model 253 | Model 257 | ||||
|---|---|---|---|---|---|---|---|
| BA86.10-P-1001-03E | Nut, holder for pressure medium reservoir to body | M6 | Nm | 8 | 8 | ||
| BA86.10-P-1002-03E | Pipe for inerting to engine | M6 | Screw | Nm | 8 | 8 | |
| Nut | Stage 1 | Nm | 8 | 8 | |||
| Stage 2 | ∠° | 30 | 30 | ||||
INERTING
| Number | Designation | Model 290 | ||||
|---|---|---|---|---|---|---|
| BA86.10-P-1001-03E | Nut, holder for pressure medium reservoir to body | M6 | Nm | 8 | ||
| BA86.10-P-1002-03E | Pipe for inerting to engine | M6 | Screw | Nm | 8 | |
| Nut | Stage 1 | Nm | - | |||
| Stage 2 | ∠° | - | ||||