Remove/Install Front Fender Liner - AR88.10-P-1300LW

WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205

Model 253

Model 293

Shown on fender liner, Model 205.0

Fig 1: Front Fender Liner Components Location - Model 205 (Shown On Fender Liner, Model 205.0)

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Raise vehicle	Model 205 Model 253 Model 293
		Model 205, Model 253	AR00.60-P-1002LWG
2	Remove screw (5)
3	Remove expansion rivets (2)
4	Unscrew nuts (3, 4)
5	Pull outer edges of fender liner (front section) (1.1) and fender liner (rear section) (1.2) toward inside out of wheel arch lip and remove fender liner (front section) (1.1) and fender liner (rear section) (1.2)
6	Install in the reverse order