Adjust Headlamps - AR82.10-P-4735CW

Model 172.4, 204, 207, 212, 218, 246 

1	Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit	KEYLESS-GO start/stop button only on vehicles with CODE 889 (KEYLESS-GO).
	Risk of death  when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)	Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.	AS00.00-Z-0035-01A
	Risk of explosion/risk of fire  caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury  caused by UV light, hot components on xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning  caused by inhalation of mercury vapors and by swallowing of/skin contact with toxic salts and mercury compounds.	Do not touch parts conducting high voltage. Persons with active electronic implants  (e.g. cardiac pacemakers) must never work on xenon headlamps. Switch off the entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the danger zone. Ensure sufficient ventilation in the working area.	AS82.10-Z-0001-01A
2	Adjust headlamps	Not on model 204.0/2 as of modification year 11/1 with halogen headlamp,   not on model 204.3 with halogen headlamp,   not on model 246 with halogen headlamp
	Adjusting headlamps when driving abroad		AH82.10-P-0001-01A
3	Check headlamp adjustment
		Model 172 with halogen headlamps	AP82.10-P-8260V
		Model 204.9, model 204.0/2 up to modification year 11/1 with halogen headlamp,   Model 204.0/2 up to modification year 11/1 with Bi-xenon headlamps	AP82.10-P-8260CW
		Model 207, 212 with halogen headlamps   Model 218 with Bi-Xenon headlamps	AP82.10-P-8260EW