Retrofit Navigation Box - AN82.85-P-0020-01W

MODEL 172.4## 

(except 172.475) 1# 

Model 204.0## /2## 

(except 204.077 /277) 1# as of 1.3.11 as of Model Year 2012 

MODEL 204.3## 

(except 204.377) 1# 

MODEL 166.0 

1. Break coverings (20.1) out of glove box (20).

   Courtesy of MERCEDES-BENZ USA

   Courtesy of MERCEDES-BENZ USA

2. Insert bracket for navigation module (A2/30-1) into cutouts (arrows) on glove box (20) and fasten with bolts (21).
3. Set down glove box (20) in front passenger footwell.
4. Join connector for low voltage differential signal (LVDS) (2.1) of LVDS wiring harness (2) to navigation module cradle.
5. Connect white 2-pin connector (12.3) of antenna line to navigation module cradle.
6. Connect black 12-pin connector (3.3) of navigation module wiring harness (3) to navigation module cradle.

Courtesy of MERCEDES-BENZ USA