Remove/install antenna splitter - AR82.70-P-8953RK

MODEL 231 

with CODE 348 (Emergency call/assistant system) 

Fig 1: Antenna Splitter Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Switch off ignition and remove transmitter key (A8/1) or KEYLESS-GO start/stop button (S2/3) from electronic ignition lock control unit (N73)	KEYLESS-GO start/stop button (S2/3) only with CODE 889 (KEYLESS-GO).
2	Remove rear wall paneling		AR68.30-P-4750RK
3	Separate electrical connectors (2)
4	Remove Global Positioning System antenna splitter (A2/5)	To do this, remove bolts (1).
5	Install in the reverse order