Install new radial sealing ring on outside right of front axle gear - AR33.30-P-0540LFX
MODEL 217, 222 with TRANSMISSION 722.96/97
MODEL 217, 222 with TRANSMISSION 725.04/05
Shown on model 222
| Notes on avoiding damage through contamination and foreign objects | AH00.00-P-5000-01A | ||
| Notes on repair work on suspension components | AH00.00-P-0100-01A | ||
| Remove/install | |||
| 1 | Remove right front axle shaft | Model 217 with transmission 722.96/97 Model 217, 222 with transmission 725.04/05 Model 222 with transmission 722.96/97 except code Z07 (Top protection) |
AR33.30-P-0620LFX |
| 2 | Pull radial shaft sealing ring (2) out of front axle transmission (1) using internal extractor, extraction tool and impact extractor | ||
| Figure | |||
| Figure | |||
| Figure | |||
| Fig 4 | |||
| 3 | Drain oil out of front axle transmission (1) | *BA33.30-P-1008-03G | |
| *BF33.30-P-1001-03F | |||
| 4 | Install in the reverse order | ||
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 5 | Perform engine test run and check front axle transmission (1) for leaks and that it is functioning correctly |
FRONT AXLE GEAR
| Number | Designation | Model 217 | Model 222 | |
|---|---|---|---|---|
| BA33.30-P-1008-03G | Front axle transmission drain screw | Nm | 20 | 20 |
FRONT AXLE GEAR
| Number | Designation | Model 217 | Model 222 | ||
|---|---|---|---|---|---|
| BF33.30-P-1001-03F | Hypoid gear oil | Filling capacity | Liter | 0, 55 | 0, 55 |
| Specification | Universal hypoid gear oils (specification 235.7). MB 235.7/235.74 FE hypoid gear oil A 001 989 33 03/Mobilube FE/FE Plus 75W-85 | Universal hypoid gear oils (specification 235.7). MB 235.7/235.74 FE hypoid gear oil A 001 989 33 03/Mobilube FE/FE Plus 75W-85 | |||