References to test conditions for engine testing and adjusting work - AH07.00-P-3000-01A
WARNING: This page does not describe the selected car, but rather 202 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz GLA250, and 2019 Mercedes-Benz SLC300. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 104, 111, 112, 113, 119, 120, 137, 166, 266, 271, 272, 275, 285, 601, 602, 603, 604, 605, 606, 611, 612, 613, 628, 629, 640, 642, 646, 647, 648, 668
General test conditions
- Check the external condition of the engine, pay attention to leaks and look out for any possible noises when the engine is running.
- The engine oil change interval must not be exceeded. An engine oil and filter change must otherwise be carried out subject to a special charge.
On vehicles fitted with maintenance interval display it is only necessary to change the engine oil if this is indicated.
- Engine oil temperature is between 80 °C and 100 °C.
- Accessories are switched off.
In the event of complaints in the starting or warm-up phase, do not condition the engine to operating temperature, but proceed in a complaint-related manner.
- Coolant level OK
- Engine oil level OK
- Automatic transmission fluid level OK, leaks (visual inspection)
- Tank fill level OK