Remove/install touchpad control unit - AR54.21-P-0503LF
MODEL 217, 222.0/1
with CODE 318 (Touchpad with rotary pushbutton)
MODEL 222.9
with CODE 448 (Touchpad)
Shown on MODEL 222.177
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Switch off ignition and remove transmitter key | ||
| 2 | Open armrest (5). | ||
| 3 | Press catch tab (arrow A) and unclip cover (2) from center console (3) | ||
| 4 | Loosen bolts (1) | ||
| 5 | Remove touchpad (A105) upwards | ||
| 6 | Disconnect electrical line (4) | ||
| 7 | Remove touch pad (A105) | ||
| 8 | Install in the reverse order |