Retrofit illuminated door sill molding - AZ82.20-P-0001LF

MODEL 222.0 (except 222.077) 

MODEL 222.1 (except 222.177/178/179) 

MODEL 222.9 

Fig 1: Retrofit Illuminated Door Sill Molding Related Components

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove
1	Remove driver and front passenger seat
			AR91.10-P-1000LF
2	Disconnect battery ground line
			AR54.10-P-0003LF
3	Remove left and right front inner door sills
4	Remove cover below left of instrument panel
			AR68.10-P-1500LF
5	Remove side paneling of instrument panel at left
6	Remove cover below right dashboard
			AR68.10-P-1520LF
7	Detach door seals from entrance area at left and right
8	Remove left and right front door sills	Mounting wedge	Figure
9	Remove left and right front floor covering
10	Remove left and right rear door sills	MODEL 222.1 (except 222.177/178/179), 222.9 Mounting wedge	Figure
11	Remove inner door sills a rear left and right	MODEL 222.1 (except 222.177/178/179), 222.9
12	Loosen trim at left and right B-pillar at bottom	MODEL 222.1 (except 222.177/178/179), 222.9
			AR68.30-P-4700LF
	Install
13	Retrofit illuminated door sill molding control unit (1)		AZ82.20-P-0001-05LF
		Self-adhesive velcro fastener	*BR00.45-Z-1084-02A
14.1	Retrofit wiring harness for front illuminated door sill molding (2)	MODEL 222.0 (except 222.077)	AZ82.20-P-0001-04LF
14.2	Retrofit wiring harness for front illuminated door sill molding (2) and wiring harness for rear illuminated door sill molding (3)	MODEL 222.1 (except 222.177/178/179) MODEL 222.9	AZ82.20-P-0001-04LF
15	Retrofit left front illuminated door sill molding (E17/47) and right front illuminated door sill molding (E17/48)		AZ82.20-P-0001-01LF
16	Retrofit left rear illuminated door sill molding (E17/51) and right rear illuminated door sill molding (E17/52)	MODEL 222.1 (except 222.177/178/179) MODEL 222.9	AZ82.20-P-0001-01LF
17	Install remaining parts
	Update Vehicle Documentation (VeDoc)
18	Attach a note "Illuminated door sill moldings retrofitted as per AZ82.20-P-0001LF " under field organization texts for DG 68 and DG 82
	Check
19	Perform function check on left front illuminated door sill molding (E17/47) and right front illuminated door sill molding (E17/48)	The left front illuminated door sill molding (E17/47) is switched on by opening the left front door and the right front illuminated door sill molding (E17/48) is switched on by opening the right front door. The left front illuminated door sill molding (E17/47) or right front illuminated door sill molding (E17/48) switches off automatically after approx. 5 min after opening the respective door.
20	Perform function check of left rear illuminated door sill molding (E17/51) and right rear illuminated door sill molding (E17/52)	MODEL 222.1 (except 222.177/178/179) MODEL 222.9 The left rear illuminated door sill molding (E17/51) is switched on by opening the left rear door, the right rear illuminated door sill molding (E17/52) is switched on by opening the right rear door. The left rear illuminated door sill molding (E17/51) or the right rear illuminated door sill molding (E17/52) switches off automatically approx. 5 min after opening the respective door.

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA