Remove/install mirror glass - AR88.70-P-9020LF
MODEL 205, 217, 222, 253
Shown on model 222
| Risk of injury caused by irritation of the skin, eyes and respiratory system through contact or inhalation of substances contained in the mirror lens. | Wear protective gloves and safety glasses. | AS60.00-Z-0008-01R | |
| Remove/install | |||
| 1 | Tilt out mirror glass (1) on outside | ||
| 2 | Pull mirror glass (1) toward rear by hand and unclip from outside mirror (2) | ||
| 3 | Disconnect electrical connectors (3, 4) and remove mirror glass (1) | ||
| 4 | Install in the reverse order |