Remove/install headliner - AR68.30-P-4300LF
MODEL 222.0/1/9
Shown on vehicle with CODE 413 (Panoramic sliding roof with ASD)
Shown on model 222.0
| Remove/install | |||
| 1 | Remove paneling from C-pillars | MODEL 222.0/1 | AR68.30-P-4490LF |
| MODEL 222.9 | AR68.30-P-4490LFA | ||
| 2 | Remove headliner service flap (7) | ||
| 3 | Remove panelings from B-pillars | AR68.30-P-4700LF | |
| 4 | Remove paneling on A-pillars | AR68.30-P-4050LF | |
| 5 | Remove cover from inside rearview mirror | ||
| 6 | Remove overhead control panel control unit (N70) | AR82.20-P-1000LF | |
| 7 | Remove left and right sun visor (2) | ||
| 8 | Remove front grab handle (3) and rear grab handle (4) from headliner (1) | ||
| 9 | Detach edge guard (8) in area of headliner (1) | ||
| 10 | Open front and rear roller sun blind (5, 6) | On vehicles with CODE 413 (Panoramic sliding roof with ASD) | |
| 11 | Remove rear air conditioner housing | MODEL 222.1/9 with CODE 582 (Rear air conditioner) |
AR83.50-P-9020LF |
| 12 | Remove glove compartment | MODEL 222.1/9 | AR68.10-P-1400LF |
| 13 | Remove driver seat | MODEL 222.1/9 | AR91.10-P-1000LF |
| 14.1 | Move passenger seat toward rear and to laying position | MODEL 222.1/9 | |
| 14.2 | Move driver and passenger seat toward rear and move backrest downward as far as possible | MODEL 222.0 | |
| 15 | Remove coat hook (9) and unscrew bolts (10) | MODEL 222.0/1 | |
| 16 | Remove speaker in headliner (1) | MODEL 222.0/1/9 with CODE 811 (Advanced sound system) |
AR82.62-P-7876LF |
| 17 | Unscrew bolts from bracket of speaker | On vehicles with CODE 811 (Advanced sound system) | |
| 18 | Unhook headliner (1) on frame of panoramic sliding roof | On vehicles with code (413) Panoramic sliding roof | |
| 19 | Unclip retaining clips (11) and push headliner (1) toward rear | ||
| 20 | Guide headliner (1) to passenger side in direction of arrow | ||
| 21 | Transfer wiring harness (15) on headliner (1) | When replacing headliner (1) | |
| 22 | Remove mirror in rear (13) | When replacing headliner (1) | |
| 23 | Install in the reverse order |