Retrofit Control Unit - AZ82.20-P-0001-05LF
MODEL 222.0/1/9
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1084-02A | Self-adhesive velcro fastener | ACS Armoured Car Systems GmbH Industriestr. 13 86551 Aichach Germany Tel. +49 8251 8926-0 Fax +49 8251 8926-40 www.acs-armcar.com |
- Stick felt tape (6) to upper side of illuminated door sill molding control unit (1).
- Apply following to underside of illuminated door sill molding control unit (1): velcro strip (7).
- Remove carrier foils from velcro strips of illuminated door sill molding control unit (1).
- Glue illuminated door sill molding control unit (1) onto powertrain control unit.
The illuminated door sill molding control unit (1) must not obstruct installation of the footrest.