Remove/Install Front Seat Belt Height Adjustment Mechanism - AR91.40-P-1100LF

Model 222.0/1/9 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Detach upper paneling on the left or right B-pillar and place to one side	Do not disconnect belt end fitting at the front seat.	AR68.30-P-4700LF
2	Remove belt guide bracket screw/bolt (3) and remove belt guide bracket (2)	Bolt at front belt guide bracket	*BA91.40-P-1005-01T
3	Remove belt height adjuster screw/bolt (4)	Bolt at front belt height adjuster	*BA91.40-P-1006-01T
4	Unhook belt height adjuster (1) and remove upwards	Ensure the belt height adjuster (1) is seated correctly in B-pillar.
5	Install in the reverse order

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		MODEL 222
BA91.40-P-1005-01T	Bolt at front belt guide bracket	Nm	35

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		MODEL 222
BA91.40-P-1006-01T	Bolt at front belt height adjuster	Nm	35