Remove/Install Rear Seat Adjustment Mechanism - AR91.12-P-1520LFA
Model 222.0/1/9
with code 223 (Electric backrest adjustment and head restraints)
Shown on right side of vehicle, with CODE 453 (Executive seat)
| Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Remove/install | |||
| 1 | Remove seat cushion (1) | AR91.12-P-1020LFA | |
| 2 | Move seat adjustment unit (2) back until screws/bolts (8) are accessible | Model 222.0/1/9 with code 223 (Electric backrest adjustment and head restraints) with code 453 (Rear reclining seat) |
|
| 3 | Remove screws/bolts (8) | *BA91.12-P-1002-03L | |
| 4 | Expose wiring harnesses (4, 5) on seat adjustment unit (2) | Fig 1 | |
| 5 | Disconnect electrical connector (6) | ||
| 6 | Remove bolts (3) | *BA91.12-P-1002-03L | |
| 7 | Remove seat adjustment unit (2) | ||
| 8 | Remove leg rest (7) | Model 222.0/1/9 with code 223 (Electric backrest adjustment and head restraints) with code 453 (Rear reclining seat) When replacing seat adjustment unit (2). |
|
| 9 | Install in the reverse order |
REAR SEATS
| Number | Designation | Model 222 | |
|---|---|---|---|
| BA91.12-P-1002-03L | Bolt, seat adjustment unit to body | Nm | 18 |