Remove/Install Front Seat Lumbar Support Air Cushion - AR91.25-P-1450LF
Model 217
except code 432 (Dynamic seats left and right)
Model 222
except code 432 (Dynamic seats left and right)
Shown on Model 222
| Remove/install | |||
| 1 | Remove front seat backrest padding | AR91.10-P-1095LF | |
| 2 | Disconnect electrical connector (1) from pneumatic pump | ||
| 3 | Disconnect electrical connector (2) from controller unit (3) | ||
| 4 | Unhook springs (4) | Fig 1 | |
| 5 | Lift spring frame (6) out of brackets (arrows A) | ||
| 6 | Unhook spring frame (6) out of openings (arrows B) | ||
| 7 | Completely remove spring frame (6) with lumbar support (7) | ||
| 8 | Install in the reverse order | ||
| Check | |||
| 9 | Check air cushion of lumbar support (7) for proper operation |