Attach Front Axle Transmission To Support - AR33.30-P-0525-06AVG
Model 205, 213, 217, 218, 222, 238, 253, 257, 290 with transmission 725.0
with code M005 (Vehicles with 4MATIC/all-wheel drive)
Model 257 with transmission 725.1
with code M005 (Vehicles with 4MATIC/all-wheel drive)
| Notice | Notes on threaded connections fastened using a tightening angle-based tightening process | AH00.00-P-0020-01A |
FRONT AXLE GEAR
| Number | Designation | Model 205 | Model 213 | ||
|---|---|---|---|---|---|
| BA33.30-P-1006-03G | Collar bolt, front axle differential to support/oil pan | Stage 1 | Nm | 65 | 65 |
| Stage 2 | ∠° | - | - | ||
FRONT AXLE GEAR
| Number | Designation | Model 217 | Model 218 | ||
|---|---|---|---|---|---|
| BA33.30-P-1006-03G | Collar bolt, front axle differential to support/oil pan | Stage 1 | Nm | 65 | 65 |
| Stage 2 | ∠° | - | - | ||
FRONT AXLE GEAR
| Number | Designation | Model 222 | Model 238 | ||
|---|---|---|---|---|---|
| BA33.30-P-1006-03G | Collar bolt, front axle differential to support/oil pan | Stage 1 | Nm | 65 | 65 |
| Stage 2 | ∠° | - | - | ||
FRONT AXLE GEAR
| Number | Designation | Model 253 | Model 257 | ||
|---|---|---|---|---|---|
| BA33.30-P-1006-03G | Collar bolt, front axle differential to support/oil pan | Stage 1 | Nm | 65 | 65 |
| Stage 2 | ∠° | - | - | ||
FRONT AXLE GEAR
| Number | Designation | Model 290 | ||
|---|---|---|---|---|
| BA33.30-P-1006-03G | Collar bolt, front axle differential to support/oil pan | Stage 1 | Nm | 65 |
| Stage 2 | ∠° | - | ||
FRONT AXLE GEAR
| Number | Designation | Model 205 | Model 213 | ||
|---|---|---|---|---|---|
| BA33.30-P-1007-03G | Collar bolt, front axle gear to engine support | Stage 1 | Nm | 5 | 5 |
| Stage 2 | Nm | 50 | 50 | ||
| Stage 3 | ∠° | 95 | 95 | ||
FRONT AXLE GEAR
| Number | Designation | Model 217 | Model 218 | ||
|---|---|---|---|---|---|
| BA33.30-P-1007-03G | Collar bolt, front axle gear to engine support | Stage 1 | Nm | 5 | 5 |
| Stage 2 | Nm | 50 | 50 | ||
| Stage 3 | ∠° | 95 | 95 | ||
FRONT AXLE GEAR
| Number | Designation | Model 222 | Model 238 | ||
|---|---|---|---|---|---|
| BA33.30-P-1007-03G | Collar bolt, front axle gear to engine support | Stage 1 | Nm | 5 | 5 |
| Stage 2 | Nm | 50 | 50 | ||
| Stage 3 | ∠° | 95 | 95 | ||
FRONT AXLE GEAR
| Number | Designation | Model 253 | Model 257 | ||
|---|---|---|---|---|---|
| BA33.30-P-1007-03G | Collar bolt, front axle gear to engine support | Stage 1 | Nm | 5 | 5 |
| Stage 2 | Nm | 50 | 50 | ||
| Stage 3 | ∠° | 95 | 95 | ||
FRONT AXLE GEAR
| Number | Designation | Model 290 | ||
|---|---|---|---|---|
| BA33.30-P-1007-03G | Collar bolt, front axle gear to engine support | Stage 1 | Nm | 5 |
| Stage 2 | Nm | 50 | ||
| Stage 3 | ∠° | 95 | ||
Shown on front axle differential 160
It is essential to observe tightening sequence.
If this is not observed there may be some noise development and vibrations in the front axle differential (1).
Replace screws/bolts (2, 3a, 3b, 3c).
- Insert front axle transmission (1) and tighten screws/bolts (2, 3a, 3b, 3c) clockwise slightly by hand.
- Tighten screw/bolt (2) at engine support to stage 1.
.
- Tighten bolts (3a, 3b, 3c) at support brace clockwise, starting with bolt (3a)
- Tighten bolt (2) to stage 2 and stage 3