Electrical Function Schematic For Starting The Hybrid Drive System - PE08.30-P-2056-97SEH
Engine 276 in model 222.057/157
Engine 276 in model 222.163
Engine 276 in model 222.173
Engine 651.9 in model 222.004/104
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Circuit 15, status | 15C |
| 1 | Circuit 15, status | 10E |
| 10 | Wet clutch, status | 6F |
| 11 | Wet clutch, request | 3F |
| 12 | Hybrid drive system, status | 16F |
| 12 | Hybrid drive system, status | 10F |
| 13 | Hybrid drive system READY, message | 18C |
| 13 | Hybrid drive system READY, message | 24C |
| 13 | Hybrid drive system READY, message | 11G |
| 14 | Contactor, status | 11F |
| 14 | Contactor, status | 16J |
| 2 | Hybrid drive system ON, request | 18F |
| 2 | Hybrid drive system ON, request | 25J |
| 2 | Hybrid drive system ON, request | 12G |
| 3 | Electric machine temperature, signal | 21G |
| 4 | Electrical machine rotor position, signal | 21E |
| 5 | Electric machine rpm, signal | 22E |
| 6 | Electric machine, status | 15F |
| 6 | Electric machine, status | 10F |
| 7 | High-voltage battery voltage, signal | 15J |
| 7 | High-voltage battery voltage, signal | 10F |
| 8 | High-voltage battery temperature, signal | 16J |
| 8 | High-voltage battery temperature, signal | 10F |
| 9 | Contactor, request | 24J |
| 9 | Contactor, request | 12G |
| A1 | Instrument cluster | 26C |
| A100 | High-voltage battery module | 26F |
| A100 | High-voltage battery module | 27J |
| A100g1 | High-voltage battery | 27F |
| A100g1 | High-voltage battery | 27K |
| A79/1 | Electric machine | 24F |
| A79/1b1 | Electric machine temperature sensor | 24H |
| CAN C | Engine CAN | 11G |
| CAN C1 | Drive train CAN | 4G |
| CAN HMI | User interface CAN | 22C |
| CAN L | Hybrid CAN | 16F |
| CAN L | Hybrid CAN | 20J |
| Code ME04 | Mild hybrid drive | 6F |
| Code ME04 | Mild hybrid drive | 25F |
| Code ME04 | Mild hybrid drive | 18E |
| Code ME05 | Hybrid drive 85kW/90kW variant (incl. plug-in) | 25H |
| Code ME05 | Hybrid drive 85kW/90kW variant (incl. plug-in) | 6H |
| Code ME05 | Hybrid drive 85kW/90kW variant (incl. plug-in) | 18E |
| Flex E | Chassis FlexRay | 16D |
| L20 | Electric machine rotor position sensor | 24E |
| N127 | Drivetrain control unit | 13F |
| N129/1 | Power electronics control unit | 20F |
| N3/10 | ME-SFI [ME] control unit | 7F |
| N3/10 | ME-SFI [ME] control unit | 7J |
| N3/9 | CDI control unit | 8D |
| N73 | Electronic ignition switch control unit | 19C |
| N82/2 | Battery management system control unit | 26H |
| N82/2 | Battery management system control unit | 26K |
| U2018 | Valid as of model year 2018 | 1F |
| U2018 | Valid as of model year 2018 | 12F |
| U2018 | Valid as of model year 2018 | 18C |
| U2018 | Valid as of model year 2018 | 25C |
| U2018 | Valid as of model year 2018 | 25J |
| U2018 | Valid as of model year 2018 | 6J |
| U2018 | Valid as of model year 2018 | 18F |
| U2060 | Valid up to model year 2018 | 1E |
| U2060 | Valid up to model year 2018 | 12F |
| U2060 | Valid up to model year 2018 | 18B |
| U2060 | Valid up to model year 2018 | 25B |
| U2060 | Valid up to model year 2018 | 25J |
| U2060 | Valid up to model year 2018 | 6J |
| U2060 | Valid up to model year 2018 | 18E |
| U74 | Valid for diesel engines | 6C |
| U75 | Valid for gasoline engines | 6E |
| Y3/8n4 | Fully integrated transmission control, control unit | 2F |