(Function Schematic For Actuating Blower Motor - PE83.10-P-2502-97D)
Model 293
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Operation, signal | - |
| 1 | Operation, signal | - |
| 1 | Operation, signal | - |
| 2 | Evaporator drying, request | 23D |
| 2 | Evaporator drying, request | - |
| 3 | Engine running, signal | - |
| 3 | Engine running, signal | - |
| 3 | Engine running, signal | - |
| 4 | Circuit 15, status | 22D |
| 5 | Dew point temperature, signal | - |
| 5 | Dew point temperature, signal | - |
| 6 | Solar radiation, signal | - |
| 6 | Solar radiation, signal | - |
| 7 | Interior temperature sensor, signal | - |
| 8 | Crash, signal | - |
| 9 | Blower motor, request | - |
| A26/17 | Head unit | 1C |
| B38/2 | Rain/light sensor with additional functions | 1H |
| CAN B | Interior CAN | 22D |
| CAN B | Interior CAN | 22H |
| CAN B | Interior CAN | 14H |
| CAN B | Interior CAN | 14J |
| CAN HMI | User interface CAN | 14C |
| CAN HMI | User interface CAN | 14E |
| CAN HMI | User interface CAN | 7E |
| CAN HMI | User interface CAN | 7C |
| Flex E | Chassis FlexRay | 7F |
| Flex E | Chassis FlexRay | 14F |
| LIN | Local Interconnect Network | 22A |
| LIN | Local Interconnect Network | 31E |
| LIN | Local Interconnect Network | 7A |
| LIN | Local Interconnect Network | 14A |
| N10/6 | Front central control unit | 9H |
| N127 | Drivetrain control unit | 9F |
| N129/1 | Electric machine 1 power electronics control unit | 1F |
| N129/2 | Electric machine 2 power electronics control unit | 1F |
| N133/1 | Instrument cluster control unit | 1E |
| N2/10 | Supplemental restraint system control unit | 1K |
| N22/1 | Climate control, control unit | 25E |
| N22/4 | Rear air conditioning operating unit | 1B |
| N29 | Electronic blower controller | 35E |
| N29/8 | Booster blower electronic blower regulator | 35F |
| N58/1 | Climate control operating unit | 1A |
| N70 | Overhead control panel control unit | 1J |
| N73 | Ignition lock control unit | 17D |