(Connect Star Diagnosis And Read Out Fault Memory - AD00.00-P-2000-04RR)

MODEL 452.3 /4 

Courtesy of MERCEDES-BENZ USA

1. Remove crossmember trim.
2. Connect STAR DIAGNOSIS connector to data link connector (X11/4).

   Pay attention to the locking of the catch lug.

3. Switch on ignition.
4. Start DAS.

   Stored faults which may be caused by disconnecting cables or by simulation during testing operations must be deleted in the diagnostic trouble code memory following the completion of the operations.

5. Remove STAR DIAGNOSIS in reverse order.