Remove/Install Poly V-Belt Of Alternator - AR13.22-P-0003MNL
Engine 176 in Model 217, 222
Shown in Model 222 without code 487 (MAGIC BODY CONTROL)
Fig 1: Poly V-Belt Of Alternator Components Location - Engine 176 In Model 222 (Shown Without Code 487)
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Remove | |||
| 1 | Remove poly-V-belt of refrigerant compressor (3) | AR13.21-P-1203MNL | |
| 2 | Release clamping device (1) counterclockwise and lock clamping device (1) using a suitable drift | ||
| 3 | Remove alternator poly-V-belt (4) | ||
| Check | |||
| 4 | Check belt pulley of alternator for damage | If damage is present ↓ Replace alternator. |
|
| AR15.40-P-5032MNL | |||
| 5 | Check guide pulley of alternator poly-V-belt (4) for damage | If damage is present ↓ Install new guide pulley for alternator poly-V-belt (4). |
|
| AR13.20-P-0011MNL | |||
| 6 | Check clamping device (1) for alternator poly-V-belt (4) for damage | If damage is present ↓ Replace clamping device (1) for alternator poly-V-belt (4). |
|
| AR13.20-P-0010MNL | |||
| Install | |||
| 7 | Fit alternator poly-V-belt (4) | AR13.22-P-3902-02MNL | |
Do not use belt wax or similar products. This leads to slipping of the alternator poly-V-belt (4). |
|||
| 8 | Pull out drift and tension alternator poly-V-belt (4) with clamping device (2) | ||
| 9 | Install refrigerant compressor poly-V-belt (3) | AR13.21-P-1203MNL | |
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 10 | Perform an engine test run and check engine for proper function |