Check Lamps In Instrument Cluster And Interior Illumination - AP54.30-P-5453HA
Model 217, 222
Shown on full display digital instrument cluster in model 222, CLASSIC view
| Preparatory activity | |||
| 1 | Switch electronic ignition lock control unit to position "2" (circuit 15). | ||
| Check | |||
| 2 | Check preglow system indicator lamp (1). | Model 222 with engine 642, 651, 656 If problems occur, ↓ rectify problems. |
|
| 3 | Check coolant temperature display (5) and coolant temperature warning lamp (4). | ↓ rectify problems. |
|
| 4 | Check fuel display (8) and fuel reserve warning lamp (7). | If problems occur, ↓ rectify problems. |
|
| 5 | Check multifunction display (6) for visible pixel faults, vertical stripes, failed segments or black points. | If problems occur, ↓ rectify problems. |
|
| 6 | Manually switch on the exterior lighting. 1 | ||
| 7 | Check instrument lighting. | If problems occur, ↓ rectify problems. |
|
| 8 | Operate instrument lighting brightness control. | If problems occur, ↓ rectify problems. |
|
| 9 | Manually switch off exterior lighting. | ||
| 10 | Switch on lamps in rear passenger compartment and check for proper operation. | If problems occur, ↓ rectify problems. |
|
| 11 | Switch off lamps in rear passenger compartment. | ||
| Finishing activity | |||
| 12 | Switch electronic ignition lock control unit to position "0". |