Check/Adjust Heads-Up Display - AR54.30-P-6401LF

Model 217 

With Code 463 (Head-up display) 

Model 222 

With Code 463 (Head-up display) 

	Check
1	Park the vehicle on a horizontal, level surface.
2	Put vehicle into ready-to-drive condition.	Vehicle in ready-to-drive condition means: Correct tire pressure Vehicle at normal level Steering is in straight-ahead position.
3	Close hood, doors and trunk lid.
4.1	Insert transmitter key and turn to position	Model 217 with code 463 (Head-up display) except code 889 (KEYLESS-GO) Model 222 with code 463 (Head-up display) except code 889 (KEYLESS-GO) Circuit 15 R is switched.
4.2	Press KEYLESS-GO start/stop button once.	Model 217 with code 463 (Head-up display) with code 889 (KEYLESS-GO) Model 222 with code 463 (Head-up display) with code 889 (KEYLESS-GO) Do not operate foot brake. Circuit 15 R is switched.
5	Set driver's seat to drive position for inspector.
6	Check head-up display.	Model 217, 222 as of model year 2018 with code 463 (Head-up display)	AR54.30-P-6401-02LWE
		Model 217, 222 up to model year 2018 with code 463 (Head-up display) If the test pictures are not displayed correctly, ↓ Adjust head-up display using diagnostic system.	AR54.30-P-6401-02LW
			AD00.00-P-2000-04B