Remove/Install Armrest On Rear Door - AR72.12-P-1020LF

Model 222 

Courtesy of MERCEDES-BENZ USA

Shown on left door lining (1) 

	Remove/install
1	Remove rear door lining (1).		AR72.12-P-1010LF
2	Drill plastic spot welds.	If armrest (2) is fastened with plastic spot welds.
			AR72.00-P-0001-01LW
		: Replace drilled plastic spot welds with screws (4) and clamp nuts (3). Fasten armrest (2) with the screws (4) and clamp nuts (3) from the repair kit.
3	Remove clamp nuts (3).	If armrest (2) is fastened with clamp nuts (3).
4	Unscrew screw/bolts (4).	If armrest (2) is fastened with screws (4).
5	Remove armrest (2).
6	Install in the reverse order