Remove/Install Load Compartment Floor CROSSMEMBER - Ar64.20-P-1315MEX
Model 167.9
with code M036 (Maybach version)
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notice | General information on body repair | AH60.00-P-0001-01KOA | |
| Notice | Pretreatment of bonding surfaces | AH60.00-P-0008-01SX | |
| General information on MB materials | AH98.00-P-9409-03A | ||
| Remove | |||
| 1 | Remove detachable parts in area of repair point. | ||
| 2 | Remove load compartment floor crossmember (1). | AR64.20-P-1315-01MEX | |
| Install | |||
| 3 | Prepare load compartment floor crossmember (1) for installation. | AR64.20-P-1315-02MEX | |
| 4 | Install load compartment floor crossmember (1). | AR64.20-P-1315-03MEX | |
| *BA64.20-P-1009-01G | |||
| Parts kit for 2-component adhesive for body | *BR00.45-Z-1162-02A | ||
| 5 | Clean sheet metal flanges. | ||
| 6 | Clean repair area. | ||
| 7 | Prime repair areas with a primer filler. | ||
| Notice | Notes on paintwork repairs | Use only primer filler approved by Daimler AG: https://xentry.daimler.com |
AH98.00-P-9408-02A |
| 8 | Seal seam after repair. | AR97.10-P-4000ME | |
| 9 | Paint repair areas and adjacent surfaces. | ||
| Notice | Notes on paintwork repairs | AH98.00-P-9408-02A | |
| 10 | Supplement cavity preservation | AR97.20-P-1500ME | |
| 11 | Reinstall detachable parts in area of repair point. |
REAR END
| Number | Designation | Model 167.9 with code M036 (Maybach version) | |
|---|---|---|---|
| BA64.20-P-1009-01G | Bolt, crossmember under load compartment floor to longitudinal member at rear | Nm | 32 |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1162-02A | Parts kit for 2-component adhesive for body | A 012 989 17 71 |