Rear Panel CROSSMEMBER Mounting Support Removal And Installation - Ar64.10-P-5749MEX
Model 167.9
with code M036 (Maybach version)
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notice | General information on body repair | AH60.00-P-0001-01KOA | |
| General information on MB materials | AH98.00-P-9409-03A | ||
| Remove | |||
| 1 | Remove detachable parts in area of repair point. | ||
| 2 | Cover all detachable parts remaining in vehicle with spark protection blankets. | ||
| 3 | Remove rear panel crossmember. | AR64.10-P-0500MEX | |
| 4 | Remove rear panel crossmember mounting support (1). | AR64.10-P-5749-01MEX | |
| Install | |||
| The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system. | AS00.00-Z-0007-01A | |
| Notice | Measures for preventing damage to components when performing electric welding and soldering work | AH60.00-P-0001-02A | |
| 5 | Prepare rear panel crossmember mounting support (1). | AR64.10-P-5749-02MEX | |
| 6 | Install rear panel crossmember mounting support (1). | AR64.10-P-5749-03MEX | |
| *BA64.20-P-1007-01G | |||
| 7 | Clean sheet metal flanges. | ||
| 8 | Install rear panel crossmember. | AR64.10-P-0500MEX | |
| 9 | Remove spark protection blankets. | ||
| 10 | Reinstall detachable parts in area of repair point. |
REAR END
| Number | Designation | Model 167.9 with code M036 (Maybach version) | |
|---|---|---|---|
| BA64.20-P-1007-01G | Screw, rear panel mounting support to body | Nm | 23 |