Check Wiper Arms And Adjust - AR82.30-P-6000ME
Model 167
MODIFICATION NOTES
| 06.10.2020 | Special tool added. | Operation steps 5, 6 | 205 589 00 21 00 |
| 06.10.2020 | Method revised. | Operation steps 3.1, 3.2, 4.1, 4.2, 7.1, 7.2 | AR82.30-P-6000-01ME |
| Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). | AS82.30-Z-0001-01A | |
| Notes on wiper arm adjustment | AH82.30-P-0001-01A | ||
| Remove | |||
| 1 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
| 2 | Move windshield wiper system into reversing position. | ||
| 3 | Remove wiper blades (3). | ||
| Clean | |||
| 4 | Clean wiper blade mounts on driver-side wiper arm (1) and passenger-side wiper arm (2) using a clean cloth. | ||
| Check | |||
| 5 | Check angle of incidence of driver-side wiper arm (1) and passenger-side wiper arm (2) relative to windshield. | AR82.30-P-6000-01ME | |
Otherwise windshield will be damaged. Angle of incidence of driver-side wiper arm in reversing position |
*BE82.30-P-1001-01J | ||
| Angle of incidence of passenger-side wiper arm in reversing position | *BE82.30-P-1002-01J | ||
| Angle of incidence of driver-side wiper arm in parked position | *BE82.30-P-1003-01J | ||
| Angle of incidence of passenger-side wiper arm in parked position | *BE82.30-P-1004-01J | ||
incl. heated windshield washer system) Adapter |
Fig 3 | ||
| Fig 4 | |||
Adapter |
Fig 1 | ||
| Adjust | |||
| 6 | Adjust angle of incidence of driver-side wiper arm (1) or passenger-side wiper arm (2) in parked position. | If check values deviate from tolerance range in reversing position or in parked and reversing position. | |
| Model 167 with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system) | AR82.30-P-6100-01ME | ||
| Model 167 except code 874 (MAGIC VISION CONTROL incl. heated windshield washer system) |
AR82.30-P-6100-01MEB | ||
| Angle of incidence of driver-side wiper arm in parked position | *BE82.30-P-1003-01J | ||
| Angle of incidence of passenger-side wiper arm in parked position | *BE82.30-P-1004-01J | ||
Adapter |
Fig 3 | ||
| Fig 4 | |||
| Fig 1 | |||
Adapter |
Fig 2 | ||
| Install | |||
| 7 | Install wiper blades (3). |
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS
| Number | Designation | Model 167 | ||
|---|---|---|---|---|
| BE82.30-P-1001-01J | Angle of incidence of driver-side wiper arm in reversing position | Left-hand drive vehicle | ∠° | -2, 0...-6, 0 |
| Right-hand drive vehicle | ∠° | +2, 0...+6, 0 | ||
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS
| Number | Designation | Model 167 | ||
|---|---|---|---|---|
| BE82.30-P-1002-01J | Angle of incidence of passenger-side wiper arm in reversing position | Left-hand drive vehicle | ∠° | -3, 0...-7, 0 |
| Right-hand drive vehicle | ∠° | +3, 0... +7, 0 | ||
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS
| Number | Designation | Model 167 | ||
|---|---|---|---|---|
| BE82.30-P-1003-01J | Angle of incidence of driver-side wiper arm in parked position | Left-hand drive vehicle | ∠° | +2, 0...+6, 0 |
| Right-hand drive vehicle | ∠° | -2, 0...-6, 0 | ||
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS
| Number | Designation | Model 167 | ||
|---|---|---|---|---|
| BE82.30-P-1004-01J | Angle of incidence of passenger-side wiper arm in parked position | Left-hand drive vehicle | ∠° | +2, 0...+6, 0 |
| Right-hand drive vehicle | ∠° | -2, 0... -6, 0 | ||