Remove/Install Left Front Body Acceleration Sensor - AR32.22-P-0004ME
Model 167
with code 490 (Electrohydraulic suspension)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
| 2 | Remove cover above suspension strut tower. | ||
| 3 | Release electrical connector (1) and disconnect. | ||
| 4 | Unbolt nut (2). | ||
| 5 | Remove front left body acceleration sensor (B24/3). | ||
| 6 | Install in the reverse order. |