(Unfasten/Fasten Drip Rail In Area Of Windshield - AR88.80-P-4000LF)
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2023 Mercedes-Benz C43 AMG, 2022 Mercedes-Benz C43 AMG, 2021 Mercedes-Benz C43 AMG, 2020 Mercedes-Benz C43 AMG, and 2019 Mercedes-Benz C43 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 217, 222
Shown on right drip rail (1) on MODEL 222
| Remove/install | |||
| 1 | Open engine hood | ||
| 2 | Unclip drip rail (1) from retaining clips (2) on A pillar starting at front with assembly wedge | Unclip drip rail (1) from retaining clips (2) by pulling in straight line (direction of arrow). Otherwise the mounts on the retaining clips (2) on the A-pillar can be damaged. |
|
Carefully unclip drip rail (1) from retaining clips (2). Otherwise the drip rail (1) can be deformed otherwise. |
|||
| Fig 1 | |||
| 3 | Unclip drip rail (1) on retaining clips (3) from roof paneling with assembly wedge and remove | Carefully unclip drip rail (1) from retaining clips (3). Otherwise the drip rail (1) can be deformed otherwise. |
|
| Fig 1 | |||
| 4 | Install in the reverse order |