Remove And Install Wiper Arm - AR82.30-P-6100LW

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2023 Mercedes-Benz C43 AMG, 2022 Mercedes-Benz C43 AMG, 2021 Mercedes-Benz C43 AMG, 2020 Mercedes-Benz C43 AMG, and 2019 Mercedes-Benz C43 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 205

Model 213

Model 238

Model 253, 293

	Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin.	Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leak free in safely closed original containers and out of the reach of children.	AS82.35-Z-0001-01A
	Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.	When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m).	AS82.30-Z-0001-01A
	Remove/install
1	Move windshield wiper system to rest position.
2	Switch off ignition and store transmitter key outside of transmission range (min. 2 m).
3	Move engine hood to upright position.
4	Detach driver-side wiper arm or passenger-side wiper arm.	Model 205, 213, 253, 293 Model 238 except code 874 (MAGIC VISION CONTROL, heated)	AR82.30-P-6100-03LWE
		Model 238 with code 874 (MAGIC VISION CONTROL, heated) Position driver-side wiper arm or passenger-side wiper arm based on window markings.	AR82.30-P-6100-03LWO
		Nut to wiper arm	*BA82.30-P-1001-01M
		Thrust washer M 10x1.5	Fig 1
		Puller	Fig 2
5	Remove hose guide from passenger-side wiper arm.	Model 238 with code 874 (MAGIC VISION CONTROL, heated) When replacing the passenger-side wiper arm.
6	Install in the reverse order
	Check
7	Perform function check on windshield wiper system.
		Model 293	AP82.35-P-8252I
		Model 253	AP82.35-P-8252C
		Model 205	AP82.30-P-8252CAA
		Model 213, 238	AP82.35-P-8252D