Remove/Install Overhead Control Panel Control Unit - AR82.20-P-1000ME
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2025 Mercedes-Benz Maybach GLS600, 2025 Mercedes-Benz GLS63 AMG, 2024 Mercedes-Benz Maybach GLS600, 2024 Mercedes-Benz GLS63 AMG, and 2023 Mercedes-Benz Maybach GLS600. However, it is still accessible from the selected car via links, so may be relevant.
Model 167
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Perform commissioning of overhead control panel control unit (N70). | If the overhead control panel control unit (N70) is replaced. | |
| 2 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
| 3 | Unclip overhead control panel control unit (N70) at rear using a plastic card or similar object (approx. 2 mm thick) and fold downwards (arrow). | Otherwise the roof lining will be damaged. |
|
| 4 | Release and disconnect electrical connectors from overhead control panel control unit (N70). | ||
| 5 | Remove overhead control panel control unit (N70). | ||
| 6 | Install in the reverse order. |