Remove/Install Door Sill Molding - AR68.30-P-4100ME
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2025 Mercedes-Benz Maybach GLS600, 2025 Mercedes-Benz GLS63 AMG, 2024 Mercedes-Benz Maybach GLS600, 2024 Mercedes-Benz GLS63 AMG, and 2023 Mercedes-Benz Maybach GLS600. However, it is still accessible from the selected car via links, so may be relevant.
Model 167
Shown on front left side of vehicle
Shown on left side of vehicle
| Remove/install front door sill (1) | |||
| 1 | Unclip front door sill (1) from the retaining clamps (2) (arrows) starting at the rear and working forward. | If the retaining clamps (2) are damaged: ↓ Replace the corresponding retaining clamps (2). |
Fig 1 |
| 2 | Remove front door sill (1). | ||
| 3 | Install in the reverse order. | ||
| Remove/install rear door sill (3) | |||
| 4 | Unclip rear door sill (3) from the retaining clamps (4) (arrows) starting at the front and working toward the rear. | If the retaining clamps (4) are damaged, ↓ Replace the corresponding retaining clamps (4). |
Fig 1 |
| 5 | Remove rear door sill (3). | ||
| 6 | Install in the reverse order. |