Prepare Panoramic Sliding Roof Frame Body Flange For Installation - AR77.21-P-0801-03ME
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2025 Mercedes-Benz Maybach GLS600, 2025 Mercedes-Benz GLS63 AMG, 2024 Mercedes-Benz Maybach GLS600, 2024 Mercedes-Benz GLS63 AMG, and 2023 Mercedes-Benz Maybach GLS600. However, it is still accessible from the selected car via links, so may be relevant.
Model 167.1/9
With Code 413 (Automatic panoramic sliding sunroof)
| Topical note | Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A |
- Cut down adhesive beads (1) on body flange (2) to a remaining height of approx. 1 to 2 mm using a scraper.
- Remove cutting residues from body flange (2).
- Repair paintwork damage at body flange (2).
Use only primer filler approved by Daimler AG: https://xentryportal.i.daimler.com
- Clean adhesive beads (1) on body flange (2).
- Apply activator to body flange (2).
Apply activator only after drying has dried.
The strength of the adhesively bonded connection is otherwise impaired and the required adhesion of the adhesive material is not ensured.