Prepare Body Flange For Front Fixed Element Of Panoramic Sliding Sunroof For Installation - AR77.21-P-0803-03ME
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2025 Mercedes-Benz Maybach GLS600, 2025 Mercedes-Benz GLS63 AMG, 2024 Mercedes-Benz Maybach GLS600, 2024 Mercedes-Benz GLS63 AMG, and 2023 Mercedes-Benz Maybach GLS600. However, it is still accessible from the selected car via links, so may be relevant.
Model 167 With Code 413 (Panoramic sliding sunroof/glass roof)
| Notice | Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A |
Shown on 167.1 With Code 413 (Panoramic sliding sunroof/glass roof)
Shown on 167.3 With Code 413 (Panoramic sliding sunroof/glass roof)
- Cut adhesive beads (1) down to a height of approx. 1 to 2 mm using scraper.
- Remove cutting residues from body flange (2).
Use only primer filler approved by Daimler AG:
https://xentryportal.i.daimler.com
- Clean residual glue bead with the cleaner.
- Repair paint damage.
- Apply primer in gluing area if glue residues are not present.
Only use the repair kit approved by the manufacturer from the replacement part system. Otherwise, adhesion problems will occur.
Apply primer only after primer has dried. Otherwise the strength of the adhesive connection can be impaired and proper adhesion of the adhesive material is not ensured.
The primer is included in the repair kit.