Install Panoramic Sliding Roof Frame - AR77.21-P-0801-05ME
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2025 Mercedes-Benz Maybach GLS600, 2025 Mercedes-Benz GLS63 AMG, 2024 Mercedes-Benz Maybach GLS600, 2024 Mercedes-Benz GLS63 AMG, and 2023 Mercedes-Benz Maybach GLS600. However, it is still accessible from the selected car via links, so may be relevant.
Model 167.1/9
With Code 413 (Automatic panoramic sliding sunroof)
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Topical note | Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A |
- Place panoramic sliding sunroof frame (1) onto body.
Five helpers required.
- Align panoramic sliding sunroof frame (1) with strips of adhesive tape.
Do not move vehicle for at least 10 h after gluing in the panoramic sliding sunroof frame (1).
The strength of the adhesively bonded connection is otherwise impaired and the required adhesion of the adhesive material is not ensured.
- Place loads on panoramic sliding sunroof frame (1) during curing time of adhesive material.
Otherwise the panoramic sliding roof frame (1) can be damaged.