Remove/Install Trim Panel At D-Pillar - AR68.30-P-4495LWG
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 253, 293
Shown on right side of vehicle, model 253.9 except code 810 (Sound system)
| Remove/install | |||
| 1 | Remove side load compartment paneling (1) | Model 253 (except 253.992/993), 293 | AR68.30-P-1180LWG |
| Model 253.992/993 | AR68.30-P-1180RFW | ||
| 2 | Unclip cargo area lamp (2) and disconnect electrical connector | Fig 1 | |
| 3 | Release edge guard (3) in area of D-pillar trim (4) | ||
| 4 | Unclip C-pillar paneling (4) (arrows) and remove | Fig 1 | |
| 5 | Install in the reverse order |