Wiring Diagram For DC/DC Converter Control Unit - PE54.10-P-2105-97FBA
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 253 (except 253.99) up to model year 2020
with code ME05 (HYBRID DRIVE 80KW VARIANT (INCLUDING PLUGIN))
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 40L |
| A100 | High-voltage battery module | 37L |
| A9/7 | Refrigerant compressor with magnetic clutch | 25L |
| CAN L | Hybrid CAN | 21K |
| F1/3 | Passenger-side A-pillar fuse box | 8L |
| F1/3f313 | Fuse 313 | 6K |
| F32/3 | Engine compartment pre-fuse box | 3L |
| F32/3f13 | Fuse 13 | 2K |
| F63 | Pyrofuse | 17L |
| K40/5 | Rear fuse and relay module | 12L |
| K40/5f457 | Fuse 457 | 11L |
| N129/1 | Power electronics control unit | 33L |
| N33/5 | High-voltage PTC heater | 29L |
| N83/1 | DC/DC converter control unit | 4A |
| N83/1 | DC/DC converter control unit | 12A |
| N83/1 | DC/DC converter control unit | 20A |
| N83/1 | DC/DC converter control unit | 28A |
| N83/1 | DC/DC converter control unit | 37A |
| W52/16 | Right rear longitudinal member ground point | 3E |
| X183 | Pyrotechnical separator electrical connector | 17H |
| X26 | Interior and engine wiring harness electrical connector | 24E |
| X30/44 | Hybrid CAN (CAN L) potential distributor electrical connector | 21L |
| X4/4 | Terminal block (circuit 30) | 2H |
| Z174/1z1 | Circuit 30 DC/DC converter connector sleeve | 10E |
| Z174z1 | Circuit 15 and circuit 87 DC/DC converter connector sleeve | 6E |
| Z241z1 | Circuit 30c connector sleeve | 17E |