(Remove/Install Charger Socket Cover - AR47.70-P-0015MEH)

Model 167.117/154/317/354 

Courtesy of MERCEDES-BENZ USA

Shown with code 66B (On-board xEV charging socket, Combo 1/Type 1) 

	Remove
1	Open socket cover flap (1).
2	Use suitable screwdriver to release upper locks (arrows A) first, then lower locks (arrows B) (arrow C), while lifting socket cover (1) at the same time (arrow D).
3	Remove socket cover (1).
	Install
4	Position socket cover (1) on charger feed socket (X58/23).
5	Clip in socket cover (1) at top first (arrows A) and then at bottom (arrows B).	The socket cover (1) must audibly engage on all four locks.