Remove/Install Liftgate Wiper Arm - AR82.30-P-6911ME
Model 167.1/9
MODIFICATION NOTES
| 06.05.2019 | Basic data reference BA82.30-P-1001-01R changed into BA82.30-P-1006-01R. | Operation step 7 |
| Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). | AS82.30-Z-0001-01A | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Notes on HANDS-FREE ACCESS | AH80.61-P-0001-01A | ||
| Remove/install | |||
| 1 | Move windshield wiper system to park position. | ||
| 2 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
| 3 | Mark position of wiper arm (3) using strip of adhesive tape on rear window. | ||
| 4 | Fold up cover (2). | ||
| 5 | Release nut (1) by two turns. | ||
| 6 | Release wiper arm (3) with puller from motor. | Fig 1 | |
| 7 | Unscrew nut (1) and remove wiper arm (3). | ||
| *BA82.30-P-1006-01R | |||
| 8 | Install in the reverse order. |
WINDSHIELD WIPER
| Number | Designation | Model 167 | |
|---|---|---|---|
| BA82.30-P-1006-01R | Nut to wiper arm on rear of windshield wiper system | Nm | 8 |