Remove/Install Display In Rear - AR82.60-P-7720ME

Model 167 

With Code 864 (Rear compartment entertainment package) 

Model 167 

With Code 866 (Pre-installation for Rear Seat Entertainment System) 

Shown on left side of vehicle 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).
2	Release rear compartment display (A40/5 or A40/6) using a suitable tool (2) and pull out of mounting support (1).	Model 167 with code 866 (Pre-installation for Rear Seat Entertainment System) If the display mount guide has a flap, make sure it does not close. If the flap closes, unlock the flap at 2 points using a suitable tool. This prevents any surface damage. Commercially available devices/tools  Screwdriver (0.4 x 2.5) Insert a suitable tool (2) through an opening on the underside of the display base and push the release mechanism to the right (arrow). Ensure that the rear display (A40/5 or A40/6) is correctly latched into place
3	Install in the reverse order.