Remove/Install Additional Brake Lamp - AR82.10-P-5376MEC
Model 167.3
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notes on HANDS-FREE ACCESS | AH80.61-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove upper liftgate trim. | AR72.20-P-6631MEC | |
| 2 | Disconnect electrical connector (1) from center brake lamp (E21). | ||
| 3 | Remove nuts (2). | ||
| 4 | Remove center brake lamp (E21). | ||
| 5 | Install in the reverse order. |