(Remove/Install Spare Tire Well Panel - AR68.30-P-4620MEC)
Model 167.3
Shown with code 669 (spare wheel on steel rim)
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notes on HANDS-FREE ACCESS | AH80.61-P-0001-01A | ||
| Remove/install | |||
| 1 | Open liftgate and remove rear shelf. | ||
| 2 | Remove luggage security in the load compartment. | Model 167.3 with code 942 (EASY-PACK load securing kit] Model 167.3 with code U40 (Safety net for luggage cover) |
|
| 3 | Fold load compartment floor upwards and fix in place. | ||
| 4 | Remove spare wheel (1) with stowage tray (2) | Model 167.3 with code 669 (Spare tire on steel rim) Model 167.3 with code 690 (Collapsible spare wheel) |
|
| 5 | Remove stowage tray (3). | ||
| 6 | Remove rear-end center-section trim. | AR68.30-P-4786ME | |
| 7 | Remove expansion rivets (4). | ||
| Fig 1 | |||
| 8 | Remove screw (5) and remove bracket (6). | ||
| 9 | Remove spare wheel well trim (7) from the vehicle. | ||
| 10 | Install in the reverse order. |