205 588 14 23 00 Data Sheet - WS60.00-P-0339K

WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205.4

Use in FG 60/61/62/63/64/Set B/K

Purpose:

Vehicle-specific set-up plan, straightener scope and portal straightener scope for testing and fixing the structural components in place during body repair work according to the Mercedes-Benz standard.

NOTE: The analysis and attachment of all structural components of the body is performed using only the repair method described in WIS.

Technical Note:

Only in combination with 000 588 04 23 00 body straightening system.

Procurement information:

Recommended workshop equipment and information about the manufacturers can be found in the WS information (see below).

Courtesy of MERCEDES-BENZ USA

Manufacturer

CELETTE FRANCE SAS

3, avenue Marcelin Berthelot

38200 Vienne

France

http://www.celette.com

Straightener supplementary set: 7205.5A06
NOTE: Only in combination with 7205.5B + 7205.5A05 + 7205.5A04 or 7205.5C + 7205.5A04
Portal straightener supplementary set: 7205.8B01
NOTE: Only in combination with 7205.8B