1205 588 00 23 00 Data Sheet - WS60.00-P-0076K

WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205.0

Use in FG 60/61/62/63/64/Set K

Purpose:

Straightening and portal bracket for measuring and repairing vehicle bodies.

Test equipment category CAT_A.

Reference information:

Recommended workshop equipment and information about the manufacturers can be found in the WS information (see below).

Courtesy of MERCEDES-BENZ USA

Note:

Please observe manufacturer's set-up plan.

Manufacturer 1

CELETTE FRANCE SAS

3, avenue Marcelin Berthelot

38200 Vienne

France

http://www.celette.com

Straightening tool parts list for set-up plan 7205.5B
1 x 7205.5001

1 x 7205.5002

1 x 7205.5003

1 x 7205.5004

1 x 7205.5005

2 x 7205.5006

1 x 7205.5007

1 x 7205.5008

1 x 7205.5009

1 x 7205.5010

2 x 7205.5011

2 x 7205.5012

1 x 7205.5013

1 x 7205.5014

1 x 7205.5015

1 x 7205.5016

1 x 7205.5017

1 x 7205.5018

1 x 7205.5019

1 x 7205.5020

1 x 7205.5021

1 x 7205.5022

1 x 7205.5023

2 x 7205.5024

2 x 7205.5025

1 x 7205.5026

1 x 7205.5027

1 x 7205.5028

1 x 7205.5029

2 x 7205.5031

1 x 7205.5032

1 x 7205.5033

2 x 7205.5034

1 x 7205.5035

1 x 7205.5036

2 x 7205.5037

2 x 7205.5051

2 x 7205.5055

2 x 7205.5073

2 x 7205.5074

2 x B.09.300

2 x BXY1

1 x EN.057.0

Portal bracket parts list for set-up plan 7205.8A
1 x 7205.5501

1 x 7205.5502

1 x 7205.5503

1 x 7205.5504

1 x 7205.5505

1 x 7205.5506

1 x 7205.5507

1 x 7205.5508

8 x CP.01

6 x CP.02

4 x VP.012