000 588 06 23 00 Body Measurement System - WS60.00-P-0201K

WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

Model 118, 166, 167, 177, 190, 197, 205, 206, 213, 217, 223, 238, 247, 253, 257, 290, 292, 907, 910 Model 222

except code Z07 (B7 armoring on special protection version)

except code Z19 (Pullman government sedan)

except code Z31 (Pullman Guard government sedan)

Model 463

as of model year 2019

Use in FG 60/61/62/63/64/Set K

Purpose:

Body measurement system for testing and geometric measurement of structural components during body accident diagnosis according to the Mercedes-Benz standard.

Technical Note:

Only in combination with the SHARK system scope and with the latest data sheet for the respective vehicle.

NOTE: The analysis of all structural components of the body is solely carried out using the repair method described in WIS.

Reference information:

Recommended workshop equipment and information about the manufacturers can be found in the WS information (see below).

Courtesy of MERCEDES-BENZ USA

NOTE: The data DVD mentioned below is obligatory for operation of the workshop equipment.

Manufacturer

Blackhawk S.A.

Zone Eurofret- Rue du Rheinfeld - BP 5

67026 Strasbourg Cedex

France

http://www.blackhawk.fr

Type/model: Shark
Article no.: SHA50
Accessories: Shark Data DVD
Article no.: C11B8663