LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2020 >> GLE450 >> Repair and Diagnosis >> External Pages >> Different car >> Section 305 (Sliding Roof, Soft Top, Top Attachments - 205 Chassis) >> Testing & Repair >> Remove/Install Trunk Partition Limit Switch - AR77.38-P-3696LWR

Remove/Install Trunk Partition Limit Switch - AR77.38-P-3696LWR

WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205.4 

Model 238.4 

Shown on Model 205.4 

Fig 1: Trunk Partition Limit Switch Components Location - Model 205.4
G14186266Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/Install     
1 Open trunk lid    
2 Fold trunk partition (1) up IMPORTANT
For this, the soft top must be closed.
 
3 Remove retaining clip (2)    
4 Unscrew screw/bolt (3)    
5 Unhook strap (4) on bracket (5)    
6 Disconnect electrical connector (6)    
7 Remove the bracket (5) with trunk partition limit switch (7)    
8 Install in the reverse order