LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2020 >> GLE450 >> Repair and Diagnosis >> External Pages >> Different car >> Section 305 (Sliding Roof, Soft Top, Top Attachments - 205 Chassis) >> Testing & Repair >> Remove/Install Soft Top Compartment Cover/Lid Limit Switch - AR77.39-P-3710LWR

Remove/Install Soft Top Compartment Cover/Lid Limit Switch - AR77.39-P-3710LWR

WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205.4 

Model 238.4 

Fig 1: Soft Top Compartment Lid Limit Switch Components Location - Model 205.4
G14186297Courtesy of MERCEDES-BENZ USA
REMOVING Remove     
1 Remove left striker pin mounting console (1) for soft top compartment lid   AR77.30-P-3978LWR 
2 Unclip connector (2) from striker pin mounting console (1)    
3 Knock rivet (3) off of striker pin mounting console (1) and remove rivet residues    
4 Cut wiring harness (4) at suitable point and remove left upper soft compartment lid limit switch (S84/26)    
INSTALLING Install     
5 Shorten electrical lines of new upper left soft top compartment limit switch (S84/26) to corresponding length If necessary.  
CAUTION Risk Of Injury  caused by burns to skin and eyes, Risk Of Poisoning caused by inhaling fumes during soldering. Wear protective gloves, protective clothing and safety glasses. Ensure that the work area is adequately ventilated. Secure power supply cables. Avoid sources of fire in working area. AS00.19-Z-0002-01A
6 Solder electrical lines of left upper soft top compartment limit switch (S84/26) to wiring harness (4) and insulate    
G04594336Courtesy of MERCEDES-BENZ USA

Topical Note 
Notes on soldering   AH00.19-P-1000-10A
  Notes on soft soldering   AH00.19-P-1000-07A
REFER TO SPECIAL TOOLS 000 588 00 84 00 Heat gun   WS54.00-P-0049B
      AR00.19-P-0100-09A
    SPECIAL TOOL
New passenger car wiring harness repair kit
Fig 2
    SPECIAL TOOL
Wire stripper
Fig 6
    SPECIAL TOOL
Welding bead catcher
Fig 4
    SPECIAL TOOL
Wiring harness repair kit, basic
Fig 5
    SPECIAL TOOL
Reflector
Fig 3
    SPECIAL TOOL
Adapter
Fig 7
7 Protect repair point with fabric tape after repairing line   AR00.19-P-0100-08A
8 Rivet left upper soft top compartment limit switch (S84/26) to striker pin mounting console (1) IMPORTANT
Pay attention to installation position.
 
9 Remove left striker pin mounting console (1) for soft top compartment lid   AR77.30-P-3978LWR 
Fig 2: Identifying New Passenger Car Wiring Harness Repair Kit (220 589 04 99 00)
G09976960Courtesy of MERCEDES-BENZ USA
Fig 3: Identifying Reflector (220 589 01 99 41)
G07470444Courtesy of MERCEDES-BENZ USA
Fig 4: Identifying Welding Bead Catcher (129 589 01 98 00)
G07470431Courtesy of MERCEDES-BENZ USA
Fig 5: Identifying Wiring Harness Repair Kit, Basic (000 589 13 99 00)
G07304826Courtesy of MERCEDES-BENZ USA
Fig 6: Identifying Wire Stripper (220 589 01 99 40)
G07470390Courtesy of MERCEDES-BENZ USA
Fig 7: Identifying Adapter (220 589 01 99 42)
G07470445Courtesy of MERCEDES-BENZ USA