Remove/Install Rear Seat Cushion - AR91.12-P-1020LW

WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205

except code 248 (Rear Seat With Integrated Child Seat)

except code P10 (Taxi Package Germany)

Model 213

except code 248 (Rear Seat With Integrated Child Seat)

Model 238

Model 253

Model 293

Fig 1: Rear Seat Cushion Components Location - Model 205 Except Codes 248, P10; Shown On Model 205.2

Courtesy of MERCEDES-BENZ USA

Shown on Model 205.2

	Remove/Install
1	Move driver's and front passenger seat forward.
2	Remove rubber insert in cup holder.	Model 205.3/4 except code 248 (Rear Seat With Integrated Child Seat) except code P10 (Taxi Package Germany) Model 238
3	Remove nut in cup holder.	Model 205.3/4 except code 248 (Rear Seat With Integrated Child Seat) except code P10 (Taxi Package Germany) Model 238
4	Pull seat cushion (1) at left and right upward out of pilot bushings (4).	: Ensure that wire hoop (5) is seated correctly in pilot bushings (4).
5	Disconnect and unclip electrical connector (7).	Model 205.1 with code 872 (Heated rear seats) except code 248 (Rear Seat With Integrated Child Seat) except code P10 (Taxi Package Germany) Model 213 with code 872 (Heated rear seats) except code 248 (Rear Seat With Integrated Child Seat) Model 238 with code 872 (Heated rear seats) Model 253 with code 872 (Heated rear seats) Model 293 with code 872 (Heated rear seats)
6	Press seat cushion (1) on left and right towards rear and unhook upwards from safety hooks (3).	: Ensure that wire hoop (6) is seated correctly in safety hooks (3).
7	Detach seat cushion (1) from ISOFIX mounts (2) and remove from vehicle.	Carefully remove the seat cushion (1) from vehicle. Otherwise components of the vehicle may be damaged. : Ensure that belt buckles are correctly positioned.
8	Install in the reverse order