LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2020 >> GLE450 >> Repair and Diagnosis >> External Pages >> Different car >> Section 299 (Electrical System - Body - 205 Chassis 3 Of 6) >> Testing & Repair >> Remove/Install Radio Display - AR82.60-P-7722LW

Remove/Install Radio Display - AR82.60-P-7722LW

WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205, 253 

Fig 1: Radio Display Components Location - Model 205
G14188030Courtesy of MERCEDES-BENZ USA

Shown on model 205 

NOTES Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
NOTES Notes on avoiding damage to optical fibers during repair work   AH82.60-P-0001-05AK
REMOVINGINSTALLING Remove/install     
1 Switch off ignition and remove transmitter key    
2 Unclip speaker cover (1) at instrument panel (2) (arrows) SPECIAL TOOL Clip remover Fig 2
3 Remove screws/bolts (3) from Audio/COMAND display (A40/8)    
4 Pull out Audio/COMAND display (A40/8) until electrical connectors (4 and 5) are accessible    
5 Disconnect electrical connectors (4 and 5) from Audio/COMAND display (A40/8)    
6 Remove Audio/COMAND display (A40/8) from vehicle INSTALLATION NOTESInstallation:  The screws/bolts (3) must be moved to the upper assembly position on the Audio/COMAND display (A40/8) for installation. Otherwise the interior equipment may be damaged.  
7 Install in the reverse order    
Fig 2: Identifying Clip Remover (452 589 01 63 00)
G09980802Courtesy of MERCEDES-BENZ USA