Remove And Install Wiper Arm - AR82.30-P-6100LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205
Model 213
Model 238
Model 253, 293
| Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin. | Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leak free in safely closed original containers and out of the reach of children. | AS82.35-Z-0001-01A | |
| Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). | AS82.30-Z-0001-01A | |
| Remove/install | |||
| 1 | Move windshield wiper system to rest position. | ||
| 2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 3 | Move engine hood to upright position. | ||
| 4 | Detach driver-side wiper arm or passenger-side wiper arm. | Model 205, 213, 253, 293 | AR82.30-P-6100-03LWE |
| Model 238 except code 874 (MAGIC VISION CONTROL heated) | |||
| Model 238 with code 874 (MAGIC VISION CONTROL, heated) | AR82.30-P-6100-03LWO | ||
| *BA82.30-P-1001-01M | |||
| Fig 1 | |||
| Fig 2 | |||
| 5 | Remove hose guide from passenger-side wiper arm. | Model 238 with code 874 (MAGIC VISION CONTROL, heated) When replacing the passenger-side wiper arm |
|
| 6 | Install in the reverse order | ||
| Check | |||
| 7 | Perform function check on windshield wiper system. | ||
| Model 293 | AP82.35-P-8252I | ||
| Model 253 | AP82.35-P-8252C | ||
| Model 205 | AP82.30-P-8252CAA | ||
| Model 213, 238 | AP82.35-P-8252D |
WINDSHIELD WIPER
| Number | Designation | Model 205 | Model 213 | |
|---|---|---|---|---|
| BA82.30-P-1001-01M | Nut to wiper arm | Nm | 30 | 30 |
WINDSHIELD WIPER
| Number | Designation | Model 238 | Model 253 | |
|---|---|---|---|---|
| BA82.30-P-1001-01M | Nut to wiper arm | Nm | 30 | 30 |
WINDSHIELD WIPER
| Number | Designation | Model 293 | |
|---|---|---|---|
| BA82.30-P-1001-01M | Nut to wiper arm | Nm | 30 |