Remove/Install Instrument Cluster - AR54.30-P-6015LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205
except code 464 (Full display digital instrument cluster)
Model 253 (except 253.992/993)
up to model year 2019
Shown on model 205
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Perform commissioning of instrument cluster (A1). | When replacing the instrument cluster (A1). | |
| AD00.00-P-2000-04B | |||
| 2 | Move steering wheel toward rear and down. | ||
| 3 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 4 | Unclip cover (1) at bottom (arrows C) and release at retaining clamps (2). | Fig 2 | |
| 5 | Unscrew bolts (3). | ||
| 6 | Release instrument cluster (A1) from retaining clamps (4) by pulling and remove until the electrical connector (5) is accessible. | ||
| 7 | Disconnect electrical connector (5). | ||
| 8 | Swivel instrument cluster (A1) upwards (arrow A) and remove to the left (arrow B). | ||
| 9 | Install in the reverse order. |